Epic Garden Watering System: Expansion Kit

The Epic Garden Watering System Expansion Kit includes everything you need to connect another raised bed to your existing setup, creating one seamless, hands-free irrigation system across your garden. Just connect it, customize it to your bed, and start watering in as little as 30 minutes.

Designed specifically for raised beds, this system delivers clean lines and reliable performance without the guesswork. It sends water right to the roots where your plants need it most so they grow stronger while you use less water. Made with extremely durable, UV-resistant materials, it’s built to last season after season so you spend less time maintaining and more time enjoying your garden

Fast Add-On Setup: Connect to your existing system and start watering your next bed in minutes.
Seamless Expansion: Designed to integrate perfectly with your Starter Kit. No messy tubing. Everything fits and looks intentional.
30-Minute Install: Most gardeners go from box to watering in 30 minutes. Easy, frustration-proof assembly.
Everything Included: Timer, filter, regulator, tubing, fittings. No runs to the hardware store.
Even Watering: Consistent moisture across your entire bed so there’s no dry spots
Built for Epic Raised Beds: Custom U-connector eliminates kinks over bed walls
Lasts for Years: Made with extremely durable, UV-resistant material
Adjustable Sizing: Customize the width and length to your bed. Choose from 2-4 feet wide and up to 10 feet long.
Water Saving: Uses up to 50% less water than sprinklers

Designed for Raised Beds: Each kit fits a single raised garden bed 2-4 feet wide and up to 10 feet long.

To use the Extension Kit, you must connect it to the Starter Kit. Expands irrigation to one additional bed.

What’s Included

• Adjustable Manifold (Fits 2-4 ft wide beds)
• 25 Feet of 16mm Poly Tubing
• 8 Drip Tapes (each covers up to 10 feet) with adapters and end clips
• Inline Sediment Hose Filter
• Quick Connect Fittings
• Custom U-shaped bed connector
• Landscape Staples
• Step by Step Install Guide

Manifold

• UV-resistant plastic that won’t crack or fade outdoors
• Adjusts from 2-4 feet
• Standard hose-thread inlets (3/4" GHT inlet, 1/2" NPT internal threads). Works with most spigots.
• Choose between 6" or 12" port spacing

Drip Tape

• Standard 5/8" diameter
• Thick-walled (15mm) for multi-season durability
• Drippers every 6" along the tape
• Slow, steady flow at 0.25 GPH per dripper
• Covers up to 10 ft at 6" spacing

View Instructions (PDF)

1. Connect tubing to the previous bed’s tube tee and run the tubing to your next bed. Cut the tubing at the base of the next bed and secure it with landscape staples.
2. Bring the water line to the bed with the bed connector.
3. Choose the manifold size for your bed and cap any unused ports.
4. Select between 6” and 12” spacing and attach the drip tape adapters.
5. Install each drip tape line and lock them into place with the adapters. Note: ensure the emitter holes are facing upward.
6. To seal the ends, fold the end of the tape, add the end caps, and secure it with landscape staples.
7. Enjoy hands-free watering for years!

View Full Instructions (PDF)

Q: What’s the difference between the Starter Kit and the Expansion Kit?

A: The Starter Kit is a complete watering system for one raised bed. It includes everything you need to start watering, including the hose connection components. The Expansion Kit is an add-on for additional beds. It connects to your Starter Kit and includes everything needed to irrigate one additional bed.

Q: Do I need the Starter Kit to use the Expansion Kit?

A: Yes. The Expansion Kit is designed to connect to the Starter Kit and does not include the hose connector.

Q: Can I use the starter kit on its own?

A: Yes! The starter kit is created to be a complete, stand-alone kit with everything you need to start hands-free watering a single raised garden bed.

Q: How many kits do I need for my garden?

A: Start with one Starter Kit for your first bed. Then add one Extension Kit per additional bed. For example, if you have 4 beds, you will need 1 Starter Kit and 3 Extension Kits. You can use our Epic Garden Watering System Calculator to determine the number of kits needed for your garden.

Q: Will this work for my raised bed size?

A: The watering system is designed specifically for raised beds and adjusts to fit beds between 2-4 feet wide and up to 10 feet long. The customizable manifold and drip tape make it easy to fit your setup.

Q: How long does installation take?

A: Most gardeners go from unboxing to watering in 30 minutes. This is a same-day project, not a weekend long commitment.

Q: What if I’ve never installed irrigation before?

A: This system is designed to be beginner-friendly. We’ve removed the common failure points, used quick connect fittings throughout, and made assembly fast and easy. No technical knowledge or professional required.

Q: How do I know if my plants will be watered evenly?

A: The system is engineered for uniform water distribution, so every plant in your bed gets consistent moisture and you don’t have to worry about dry spots or overwatering.

Q: How long will this system last?

A: This is not a one-season kit. It’s built to last years with 15-mil drip tape that resists UV, foot traffic, and is built for long-term outdoor use.

Q: What is the U-shaped connector for?

A: It routes water cleanly over the edge of your raised bed without kinking. No bending tubing or improvising connections.

Q: Can I expand the system later?

A: Yes. The system is fully modular. You can add Extension Kits or connect additional components as your garden grows.

Q: Will it connect to a standard garden hose?

A: Yes. The system uses a standard 3/4" garden hose (GHT) connection.

Q: Will this save water?

A: Yes. Drip irrigation delivers water directly to the roots, using up to 50% less water than traditional sprinklers.